Heat-conducting oil pump seal production material is what Heat-conducting oil pump seal packing seal and mechanical seal combination form, packing seal with high temperature filler, has good thermal adaptability, and mechanical seal is the use of high mechanical strength, wear-resistant Good cemented carbide material, to ensure the sealing performance under high temperature conditions. The structure of heat-conducting oil pump The heat-conducting oil pump is composed of a coupling, a driving motor and a pump. Such as by the ultra-high molecular weight poly FEP and PTFE plastic alloy, the former accounted for the weight ratio of 0.1% to 99.9%, which accounted for the weight ratio of 99.9% to 0.1%, with a dry powder co-grinding or wet Method of co-grinding method of manufacturing. Using hot or cold pressure sintering and other methods into a variety of products, to overcome the cold PTFE flow and deformation defects, can extend the service life. Made of imported PTFE lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, extremely strong corrosion resistance. Hot oil pump bearings are immersed in the transport medium, and transport medium lubrication and cooling generally use corrosion-resistant, high-strength engineering plastics, corundum ceramics, stainless steel as a production material. Heat pump generally use corrosion-resistant, high-strength engineering plastics, corundum ceramics, stainless steel, etc. as a production material, has good corrosion resistance, and can be transported medium from pollution. More commonly used bearings in China are mostly graphite and reinforced plastic. In particular graphite impregnated graphite having good self-lubricating property, heat resistance, low friction coefficient, wide range of applications, but more brittle graphite, low strength, and bending of the shaft is very sensitive to partial overload, special attention should be. The left end of the heat pump oil pump impeller, the pump shaft supported by the sliding bearing, the right end equipped with an inner rotor. Bracket coupling pump and motor and ensure the accuracy of the position of the magnetic rotor inside and outside, wire drawing machine.
Safety Vest,Reflective Material Co., Ltd. , http://www.chsafetyvest.com