>>>Links: Purchase and Acceptance of Tiles
1. What is a seamless brick?
This concept is often mentioned in the past two years. In the simplest sense, a tile refers to a tile whose brick and brick sides are at right angles of 90 degrees. It can be called a seamless brick, including some large tiles. Specifications of glazed wall tiles and vitrified tiles. The tiles are cut or trimmed after being fired.
2. Can I leave seamless seams during construction?
This practice is very non-standard, mainly due to the following points:
1) Since tiles have variations in length, straightness, straightness, etc., there is no such thing as a ceramic tile that does not have any errors.
2) There will also be some errors in the construction process. Mechanized products will have errors, not to mention the manual operation of the shop's workers. Errors are even more difficult to avoid.
3) The most important point is: Any object has a thermal barrier shrinkage, tiles are no exception. If the gap is too small, the ability of the ceramic tile to adapt to the environment will be deteriorated. Due to the temperature change, the tile will be broken and the normal service life of the tile will be reduced.
When tiles are under construction, leaving small joints is a major cause of cracking and arching of tiles.
3, how much more appropriate to leave the seams?
There is no uniform standard on this issue. In addition to satisfying the hot and cold shrinkage factor of the ceramic tile itself, it also needs to be combined with the decorative effect of ceramic tiles. Here are some common tile joints for a reference:
1) The size of seams for seamless wall tiles in kitchens should generally be between 1 and 1.5
Tile tile decoration tile specifications
Knee High Sock ,Leave Score,Sock Manufacturer,Sock Wholesale
Sellers Union Co., Ltd , http://www.nbshousehold.com