The main reasons for the deformation of solid wood flooring

Many informal factories now use some inferior quality, dry-in-place sheets. After additive coloring, retouching impersonation of first-class boards and pitting consumers, this is one of the main reasons leading to floor deformation.

Due to working hours in solid wood flooring, the surface is painted six times and the floor bottom is painted once. The upper and lower stresses are inconsistent. Outside air affects the floor and causes deformation.

Due to the climate and dampness of bathroom water vapor in the concrete floor, wood keel humidity, running water in pipes, warm water heating, etc., when the bottom of the floor absorbs moisture or enters water, the floor will swell and tiles, deformation, shrinkage, etc. will occur. It is difficult to handle.

The winter climate in the north is dry. Indoor heating and heating, the interior is very dry, which is equivalent to the second drying of all wood products at home, solid wood products are natural plants, it will inevitably produce changes. This is to require the use of attention should be paid to the indoor control of dry humidity and dry humidity control. This is also good for the human body. Some people say that solid wood flooring is so easy to change, then it does not spread solid wood!

This statement is also incorrect. It is because of the changes in solid wood floors that the advantages of natural plants are reflected. Natural environment protection, absorbing gases harmful to the human body, and distributing substances that are beneficial to the human body. It requires us to overcome the disadvantages of easy deformation of the floor as much as possible during floor processing.

Design Knowledge Carpentry Knowledge Nature Floor Heating Paint Cement Heating

Arc Magnet

N35Sh Arc Magnet,N35Sh Neodymium Magnet,Sintered Ndfeb Magnet

Yongze Magnet Co., Ltd. , http://www.nb-magnets.com