Why is your home tile always falling off? Many homeowners' homes have done water-proofing, and they have not done lapping treatment, so that the tiles are not affixed to the tiles. It will naturally fall for a long time. Nowadays, Xiao Bian will give you what you need to do before tiling.
The first, thin paste method, the wall with the interface agent first brush again, after professional tile adhesive leveling (and then rest assured, add AB dry hanging glue), after tiling.
Second, artificial "Mao" wall. This is the practice of “squeezing paste†for many units that have been seen before. The brush on the wall is lined with one row of brushes, or the brush is full of brushes, and then the method of brushing the hairs with a wire brush is used to dry out the tiles in accordance with the waterproof requirements. Binder with a small amount of dry AB hanging glue, mortar wall, until the small handful of a small handful of fully dried, and then use tile adhesive paving, can also be foolproof.
Specific operation:
The first step of basic inspection and processing: Different basic wall surface treatment methods are different.
Shear wall: Reinforced concrete cast-in-place wall. This type of wall requires surface chiseling. Due to the release agent on the surface, it is easy to cause the problem of wall separation, plastering and screeding.
Masonry plastering wall: It is necessary to judge whether the surface of the wall is empty. If empty drums must be repaired first;
Light partition wall: According to the firmness of the wall surface, it is recommended to do the hanging net processing, one to ensure the strength, and second to prevent cracking.
The second step is to pick up the wool: After wetting the wall, use a cement with 108 glue to grind the wetted wall.
Traditional brick laying method: tile laying method using cement mortar as a binder. Compared with the thin-paste method, the conventional paving method does not require the leveling process of the wall surface. After the wall surface is finished, the ceramic tile can be paved.
1. Matching tiling: According to the proportion of cement sand 1:2.5, the cement sand is dry mixed and mixed with water. Apply cement mortar to the back of the water-soaked tiles, and then place the bricks on the well-wetted damp wall. After the tiles are placed on the wall, no big adjustments can be made. If they are peeled off, the old cement mortar can be scraped off and reapplied.
2. Feedwater conservation: In order to ensure the combination of cement mortar and wall and bricks, after bricks are laid, it is guaranteed that the water supply will be maintained twice a day for three days (that is, water is sprayed onto the wall tiles), usually after three days. .
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Spring decoration knowledge
Welding Mask is a type of headgear used when performing certain types of welding to protect the eyes, faceandneck from flash burn, ultraviolet light, sparks, infrared light, and heat.
welding
masks are most commonly used with arc welding processes such as
shielded metal arc welding, gas tungsten arc welding, and gas metal arc
welding. They are necessary to prevent arc eye, a painful condition
where the cornea is inflamed. welding masks can also prevent retina
burns, which can lead to a loss of vision. Both conditions are caused by
unprotected exposure to the highly concentrated ultraviolet and
infrared rays emitted by the welding arc. Ultraviolet emissions from the
welding arc can also damage uncovered skin, causing a sunburn-like
condition in a relatively short period of welding.
Welding Mask
Welding Mask,Welding Face Shield,Pp Welding Mask,Flip Type Welding Mask
Greateagle Safety Products Co., Ltd. , https://www.greateaglesafety.com