Usages:
Water, gas, air and steam, black steel tubes and pipes are utilized for gas distribution inside and outside the house and for hot water circulation in boiler systems. It is also used for line pipes in oil and petroleum industries, for water wells and for water, gas and sewage purposes. It is not used for potable water or for drain waste or vent lines.
Standard: BS 1387-1985, ASTM A53, ASTM A513, ASTM A252-98, JIS G3444-2004 STK400/500, JIS G3452-2004, EN 10219, EN 10255-1996, DIN 2440
Material: Q195, Q235, Q275, Q345
Specification: 1/2"-16" (OD: 21.3mm-406.4mm)
Wall thickness: 1.0mm-12mm
Surface treatment: Galvanized, oil coating, lacquering, painting
N.D. | O.D | W.T. | WEIGHT | SCH | TEST PRESSURE | NO.of THREADS PER INCH | ||||||||
PLAIN ENDS | ||||||||||||||
kg/m | kg/ft | Grade A | Grade B | |||||||||||
in | in | mm | in | mm | blk | gal | blk | gal | psi | kg/cm2 | psi | kg/cm2 | ||
1/2 | 0.840 | 21.3 | 0.109 | 2.77 | 1.27 | 1.35 | 0.39 | 0.41 | 40 | 700 | 50 | 700 | 50 | 14 |
3/4 | 1.050 | 26.7 | 0.113 | 2.87 | 1.69 | 1.79 | 0.52 | 0.55 | 40 | 700 | 50 | 700 | 50 | 14 |
1 | 1.315 | 33.4 | 0.133 | 3.38 | 2.50 | 2.65 | 0.76 | 0.81 | 40 | 700 | 50 | 700 | 50 | 11-1/2 |
1-1/4 | 1.660 | 42.2 | 0.140 | 3.56 | 3.39 | 3.59 | 1.03 | 1.10 | 40 | 1200 | 84 | 1300 | 91 | 11-1/2 |
1-1/2 | 1.900 | 48.3 | 0.145 | 3.68 | 4.05 | 4.29 | 1.23 | 1.31 | 40 | 1200 | 84 | 1300 | 91 | 11-1/2 |
2 | 2.375 | 60.3 | 0.154 | 3.91 | 5.44 | 5.77 | 1.66 | 1.76 | 40 | 2300 | 162 | 2500 | 176 | 11-1/2 |
2-1/2 | 2.875 | 73.0 | 0.203 | 5.16 | 8.63 | 9.15 | 2.63 | 2.79 | 40 | 2500 | 176 | 2500 | 176 | 8 |
3 | 3.500 | 88.9 | 0.125 | 3.18 | 6.72 | 7.12 | 2.05 | 2.17 | --- | 1290 | 91 | 1500 | 105 | 8 |
0.156 | 3.96 | 8.29 | 8.79 | 2.53 | 2.68 | --- | 1600 | 112 | 1870 | 131 | ||||
0.188 | 4.78 | 9.92 | 10.52 | 3.02 | 3.21 | --- | 1930 | 136 | 2260 | 159 | ||||
0.216 | 5.49 | 11.29 | 11.97 | 3.44 | 3.65 | 40 | 2220 | 156 | 2500 | 176 | ||||
3-1/2 | 4.000 | 101.6 | 0.125 | 3.18 | 7.72 | 8.18 | 2.35 | 2.49 | --- | 1120 | 79 | 1310 | 92 | 8 |
0.156 | 3.96 | 9.53 | 10.10 | 2.90 | 3.08 | --- | 1400 | 98 | 1640 | 115 | ||||
0.188 | 4.78 | 11.41 | 12.09 | 3.48 | 3.69 | --- | 1690 | 119 | 1970 | 139 | ||||
0.226 | 5.74 | 13.57 | 14.38 | 4.14 | 4.38 | 40 | 2030 | 143 | 2370 | 167 | ||||
4 | 4.500 | 114.3 | 0.125 | 3.18 | 8.71 | 9.23 | 2.65 | 2.81 | --- | 1000 | 70 | 1170 | 82 | 8 |
0.156 | 3.96 | 10.78 | 11.43 | 3.29 | 3.48 | --- | 1250 | 88 | 1460 | 103 | ||||
0.188 | 4.78 | 12.91 | 13.68 | 3.93 | 4.17 | --- | 1500 | 105 | 1750 | 123 | ||||
0.237 | 6.02 | 16.07 | 17.03 | 4.90 | 5.19 | 40 | 1900 | 134 | 2210 | 155 | ||||
5 | 5.563 | 141.3 | 0.156 | 3.96 | 13.41 | 14.21 | 4.09 | 4.33 | --- | 1010 | 71 | 1180 | 83 | 8 |
0.188 | 4.78 | 16.09 | 17.06 | 4.90 | 5.20 | --- | 1220 | 86 | 1420 | 100 | ||||
0.219 | 5.56 | 18.61 | 19.73 | 5.67 | .01 | --- | 1420 | 100 | 1650 | 116 | ||||
0.258 | 6.55 | 21.77 | 23.08 | 6.64 | 7.03 | 40 | 1670 | 117 | 1950 | 137 | ||||
6 | 6.625 | 168.3 | 0.188 | 4.78 | 19.27 | 20.43 | 5.87 | 6.23 | --- | 1020 | 72 | 1190 | 84 | 8 |
0.219 | 5.56 | 22.31 | 23.65 | 6.80 | 7.21 | --- | 1190 | 84 | 1390 | 98 | ||||
0.250 | 6.35 | 25.36 | 26.88 | 7.73 | 8.19 | --- | 1360 | 96 | 1580 | 111 | ||||
0.280 | 7.11 | 28.26 | 29.96 | 8.61 | 9.13 | 40 | 1520 | 107 | 1780 | 125 | ||||
8 | 8.625 | 219.1 | 0.188 | 4.78 | 25.26 | 26.78 | 7.70 | 8.16 | --- | 780 | 55 | 920 | 65 | --- |
0.203 | 5.16 | 27.22 | 28.85 | 8.30 | 8.79 | --- | 850 | 60 | 1000 | 70 | ||||
0.219 | 5.56 | 29.28 | 31.04 | 8.92 | 9.46 | --- | 910 | 64 | 1070 | 75 | ||||
0.322 | 8.18 | 42.55 | 45.10 | 12.97 | 13.75 | 40 | 1340 | 94 | 1570 | 110 |
Usages:
Water, gas, air and steam, black steel tubes and pipes are utilized for gas distribution inside and outside the house and for hot water circulation in boiler systems. It is also used for line pipes in oil and petroleum industries, for water wells and for water, gas and sewage purposes. It is not used for potable water or for drain waste or vent lines.
Standard: BS 1387-1985, ASTM A53, ASTM A513, ASTM A252-98, JIS G3444-2004 STK400/500, JIS G3452-2004, EN 10219, EN 10255-1996, DIN 2440
Material: Q195, Q235, Q275, Q345
Specification: 1/2"-16" (OD: 21.3mm-406.4mm)
Wall thickness: 1.0mm-12mm
Surface treatment: Galvanized, oil coating, lacquering, painting
N.D. | O.D | W.T. | WEIGHT | SCH | TEST PRESSURE | NO.of THREADS PER INCH | ||||||||
PLAIN ENDS | ||||||||||||||
kg/m | kg/ft | Grade A | Grade B | |||||||||||
in | in | mm | in | mm | blk | gal | blk | gal | psi | kg/cm2 | psi | kg/cm2 | ||
1/2 | 0.840 | 21.3 | 0.109 | 2.77 | 1.27 | 1.35 | 0.39 | 0.41 | 40 | 700 | 50 | 700 | 50 | 14 |
3/4 | 1.050 | 26.7 | 0.113 | 2.87 | 1.69 | 1.79 | 0.52 | 0.55 | 40 | 700 | 50 | 700 | 50 | 14 |
1 | 1.315 | 33.4 | 0.133 | 3.38 | 2.50 | 2.65 | 0.76 | 0.81 | 40 | 700 | 50 | 700 | 50 | 11-1/2 |
1-1/4 | 1.660 | 42.2 | 0.140 | 3.56 | 3.39 | 3.59 | 1.03 | 1.10 | 40 | 1200 | 84 | 1300 | 91 | 11-1/2 |
1-1/2 | 1.900 | 48.3 | 0.145 | 3.68 | 4.05 | 4.29 | 1.23 | 1.31 | 40 | 1200 | 84 | 1300 | 91 | 11-1/2 |
2 | 2.375 | 60.3 | 0.154 | 3.91 | 5.44 | 5.77 | 1.66 | 1.76 | 40 | 2300 | 162 | 2500 | 176 | 11-1/2 |
2-1/2 | 2.875 | 73.0 | 0.203 | 5.16 | 8.63 | 9.15 | 2.63 | 2.79 | 40 | 2500 | 176 | 2500 | 176 | 8 |
3 | 3.500 | 88.9 | 0.125 | 3.18 | 6.72 | 7.12 | 2.05 | 2.17 | --- | 1290 | 91 | 1500 | 105 | 8 |
0.156 | 3.96 | 8.29 | 8.79 | 2.53 | 2.68 | --- | 1600 | 112 | 1870 | 131 | ||||
0.188 | 4.78 | 9.92 | 10.52 | 3.02 | 3.21 | --- | 1930 | 136 | 2260 | 159 | ||||
0.216 | 5.49 | 11.29 | 11.97 | 3.44 | 3.65 | 40 | 2220 | 156 | 2500 | 176 | ||||
3-1/2 | 4.000 | 101.6 | 0.125 | 3.18 | 7.72 | 8.18 | 2.35 | 2.49 | --- | 1120 | 79 | 1310 | 92 | 8 |
0.156 | 3.96 | 9.53 | 10.10 | 2.90 | 3.08 | --- | 1400 | 98 | 1640 | 115 | ||||
0.188 | 4.78 | 11.41 | 12.09 | 3.48 | 3.69 | --- | 1690 | 119 | 1970 | 139 | ||||
0.226 | 5.74 | 13.57 | 14.38 | 4.14 | 4.38 | 40 | 2030 | 143 | 2370 | 167 | ||||
4 | 4.500 | 114.3 | 0.125 | 3.18 | 8.71 | 9.23 | 2.65 | 2.81 | --- | 1000 | 70 | 1170 | 82 | 8 |
0.156 | 3.96 | 10.78 | 11.43 | 3.29 | 3.48 | --- | 1250 | 88 | 1460 | 103 | ||||
0.188 | 4.78 | 12.91 | 13.68 | 3.93 | 4.17 | --- | 1500 | 105 | 1750 | 123 | ||||
0.237 | 6.02 | 16.07 | 17.03 | 4.90 | 5.19 | 40 | 1900 | 134 | 2210 | 155 | ||||
5 | 5.563 | 141.3 | 0.156 | 3.96 | 13.41 | 14.21 | 4.09 | 4.33 | --- | 1010 | 71 | 1180 | 83 | 8 |
0.188 | 4.78 | 16.09 | 17.06 | 4.90 | 5.20 | --- | 1220 | 86 | 1420 | 100 | ||||
0.219 | 5.56 | 18.61 | 19.73 | 5.67 | .01 | --- | 1420 | 100 | 1650 | 116 | ||||
0.258 | 6.55 | 21.77 | 23.08 | 6.64 | 7.03 | 40 | 1670 | 117 | 1950 | 137 | ||||
6 | 6.625 | 168.3 | 0.188 | 4.78 | 19.27 | 20.43 | 5.87 | 6.23 | --- | 1020 | 72 | 1190 | 84 | 8 |
0.219 | 5.56 | 22.31 | 23.65 | 6.80 | 7.21 | --- | 1190 | 84 | 1390 | 98 | ||||
0.250 | 6.35 | 25.36 | 26.88 | 7.73 | 8.19 | --- | 1360 | 96 | 1580 | 111 | ||||
0.280 | 7.11 | 28.26 | 29.96 | 8.61 | 9.13 | 40 | 1520 | 107 | 1780 | 125 | ||||
8 | 8.625 | 219.1 | 0.188 | 4.78 | 25.26 | 26.78 | 7.70 | 8.16 | --- | 780 | 55 | 920 | 65 | --- |
0.203 | 5.16 | 27.22 | 28.85 | 8.30 | 8.79 | --- | 850 | 60 | 1000 | 70 | ||||
0.219 | 5.56 | 29.28 | 31.04 | 8.92 | 9.46 | --- | 910 | 64 | 1070 | 75 | ||||
0.322 | 8.18 | 42.55 | 45.10 | 12.97 | 13.75 | 40 | 1340 | 94 | 1570 | 110 |
We are producing the American and European stylish Carved Panel Mouldings which look like pure wood, but better than wood on the function. Carved Panel Mouldings are very popular in interior decoration presently. Different colors besides white can be met. After decoration Carved Panel Mouldings,the room is more plain, natural, elegant and noble.
Our PU Carved Panel Mouldings, PU Mouldings, Decorative Panel Mouldings, Wood Panel Mouldings add a decorative, historic, feel to walls, ceilings, and furniture pieces. Our Carved Panel Mouldings are made from a high density polyurethane which gives each piece the unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. The best part is you can make your own shapes and sizes by simply cutting the moulding piece down to size, and then butting them up to the decorative corners. These are also commonly used for an inexpensive wainscot look.
Specifications:
1.Modeled after original historical patterns and designs.2.Solid urethane for maximum durability and detail.
3.Lightweight for quick and easy installation.
4.Can be drawed and painted.
5.Can be cut, drilled, glued or screwed.
6.Can be used on the interior or exterior
Inner packing: Polybag packing
Outer packing: White or yellow paper carton
Our Service:
1. Factory direct sale with excellent quality, reasonable price and first-class service.
2. Timely delivery to every corner of the world.
3. Strong supply capacity, high-tech skills and advanced equipment can surely meet customers` requirement.
4. Launching new designs for each category every year.
5. Exquisite workmanship. All products 100% inspected.
6. Preferential freight by Famous shipping company.
7. Excellent after-sales service
If you want to evoke an atmosphere of stately homes, majestic hotels or huge castles, you can use DSM Decor panel mouldings, various sizes, shapes and styles are available,they are very light, easy to install and paintable.
You may use Carved Panel Mouldings to create wainscoting or frames on the walls and ceilings. As a result, Carved Panel Mouldingss offer endless combinations to create charming spaces as you image.
PU Carved Panel Mouldings,PU Mouldings,Decorative Panel Mouldings,Foam Panel Mouldings,Carved Panel Mouldings,Panel Moldings
Suntronic New Materials Technology Co., Ltd. , https://www.dsmdecor.com