CuCo2Be-C17500 (CDA 175) Cobalt Beryllium Copper is primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a cobalt alloying addition (2.40-2.70%). C17500 also Offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively.
Specification of CuCo2Be UNS.C17500
UNS/CDA
DIN/EN
International specification
Chemical composition
Avaliable forms
C17500/175
CuCo2Be
2.1285
Alloy 10
CW104C
Be:0.40-0.70%
Co:2.40-2.70%Cu:Balance
Cu+Be+Co:99.5%min
bar,round bar,flat bar,square bar,rectangular bar,hexagon bar,plate,sheet,round wire.
Typical Application for C17500 Cobalt Beryllium Copper Alloys:
Electrical Industry: Fuse Clips, Switch Parts, Relay parts, Connectors, Spring Connectors
Fasteners: Washers, Fasteners
Industrial: Springs, Seam Welding Dies, Resistance Welding Equipment, Resistance and Spot Welding Tips, Tooling for Plastic Moulds, Die-Casting Plunger Tips.
Available Sizes:
Custom Diameter &Â Sizes, Random Mill lengths
Available Products (forms):
Round bars, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.
Typical Physical Properties:
Density (g/cm3): 8.83
Density before age hardening (g/cm3): 8.75
Elastic Modulus (kg/mm2 (103)): 14.10
Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 18 x 10-6
Thermal Conductivity (cal/(cm-s-°C)): 0.48
Melting Range (°C): 1000-1070
Note:
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.
International Specification:
Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3
Strips: ASTM B534
Sheets: ASTM B534
Wires: ASTM B441
Plates: ASTM B534, SAE J461,463; RWMA Class 3
European Standards: CuCo2Be, DIN 2.1285; CW104C to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification (Published by SAE)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced to ASTM.
Mechanical Properties:
The Mechanical Properties will be available on request from customers.
Most Commonly Temper Used:
Rods/Bars/Tubes: A(TB00),H(TD04),AT(TF00),HT(TH04)
Strips: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04)
Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00)
Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)
Plates: AT(TF00),HT(TH04)
About Us:
Contact us:
Tel:Â Â +86-510-86027183
Mob:Â Â +86-13921230558
Fax:Â Â +86-510-86027228
Web: www.jywuxing.com
Â
Â
Wear Resistant Melamine Coating SPC Flooring
Maijin wear-resistant Melamine Coating SPC Flooring is a kind of brand-new green environmental protection plank.This flooring has the characteristic of natural fiber and plastic at the same time, excellent water resistance, water absorption only a few thousandths of wood, wear resistance is 3-10 times higher than wood, steel and bearing capacity is greater than whole plastic material,but the thermal expansion and contraction are smaller than steel and all plastic materials.processability is better than wood, steel, plastic and other materials, the later maintenance cost is small.Maijin wear-resistant melamine coating SPC Flooring adopts the special grinding process to increase the friction force and avoid slippage.Fire resistant material, eliminate fire hazard, effectively reduce the risk of accidents.
Melamine Coating Flooring,Environmentally Spc Flooring,Stone Polymer Composite Flooring,Wear Resistant Melamine Coating Spc Flooring
Dalian Jiamei New Material Co., Ltd. , https://www.maijinfloor.com