When decorating the balcony, most friends choose to tile. But how do you put a tile on the balcony? Many people haven't taken into consideration the paving of balcony tiles. Today, Xiao Bian gave you an introduction to the methods of the balcony tiling and what you need to pay attention to. I hope to help you!
First, stick the balcony tiling method
1. Stirring
When preparing the tiles, the tiles cannot be soaked. You can use steel balls to brush off the loose material behind the tiles. You can also wipe the dust on the back of the tiles with a damp cloth. Then put the water or emulsion in the mixing tank at the ratio recommended by the manufacturer until the adhesive is homogeneous and free of agglomerates. The adhesive after initial stirring should be left standing in a mixing drum until the manufacturer's recommended ripening time has passed.
2, tile
It is necessary to press the prepared tile in place during the binder setting and allow it to move slightly perpendicular to the combing direction to expel the air under the tile. After putting it into place, tap it with a rubber mallet and adjust the surface flatness and straightness of the seam with a cross-positioning bracket of the appropriate size.
3, clean up in time
Paved bricks should be cleaned in a timely manner, especially to remove residual binder. After the qualified adhesive is hard-hardened, it is not easily removed even on the surface of the ceramic tile. Cleaned tiles should be immediately placed with signs for isolation, to avoid contamination or disturbance, until the next caulking process.
Second, the balcony tiling construction precautions
1, try not to touch the tile, according to the vertical line and the horizontal line to retain 6--8mm mortar after the paste firmly, do caulking, rainy days is best not to construction, so as not to increase the cement dirt.
2, after caulking, use wood or other tools to scrape off the big ash, use 6--8 # garden steel to clean the mortar joints to highlight the three-dimensional sense of the brick, the tile surface residual cement must wait for its whitish (ie dry When not solidified), use dry cloth or saw (sawdust), sand, clean the surface of cement, (be careful not to use wet cloth), cloth, sponge, etc.
3, such as after the complete solidification, with a long handle chemical fiber drum brush dipped in 20% - 30% hydrochloric acid solution for a comprehensive cleaning, then rinse with water. At this time, be careful to avoid contamination of human body and clothes with hydrochloric acid.
Looked at the method of the balcony tiling introduced by the small series and the balcony tiling need to pay attention to which, more professional knowledge, in the invitation decoration will not be so ignorant, know some common sense is also great on the supervision of workers For help, if you want to know other related information, please continue to pay attention to this site, more exciting so stay tuned!
Terrace balcony decorated tiled terrace renovation plans on the balcony renovation
Low Location Lighting Components
Glow In The Dark Signage,Low Location Lighting Components,Low Location System,Glow In The Dark Tape
JINAN REALGLOW CO.,LTD , https://www.realglowsign.com