When cucumber is planted, when the cucumber grows to a certain height, it is necessary to carry out the vine. The vine is one of the important technical measures to achieve high quality and high yield of cucumber in the greenhouse, and it is the prerequisite for ensuring high quality and high yield of cucumber.
Suitable time to fall. When the growth point of cucumber plants is close to the top of the shed, and the stalks with leaves are 30 cm or more from the ridge surface, it is necessary to fall in time. Falling vines should be selected in the warm and warm afternoon. At this time, the stems and vines of the plants have low water content and soft tissue, which is not easy to damage the stems. Do not drop vines in the morning, morning or after watering with high water content, so as not to damage the stems and affect the normal growth of the plants.
Falling vine method. The slings wrapped around the stems of the cucumbers are Panasonic, and the stems are placed on the ground. The hard stems are hard to pull, and the stems are gradually entangled in the same direction on both sides of the cultivated ridge. When coiling the stems, bend the stems and bend the stems. Do not bend hard or bend in the opposite direction to avoid breaking the stems. When the vines start to fall, the stems are thinner, the interval is shorter, and the circle is smaller. After the stems are long and thick, the time interval of the vines can be slightly longer, and the circle is larger, and the vines can be 1/4 of the length of the stems. The leafy stems are kept about 15 cm from the ridge surface, and each plant retains more than 20 functional leaves, and the plant height is 0.8 to 1.5 m.
Management after falling. Appropriate temperature should be increased after falling vines to promote wound healing. Spray some fungicides in time to prevent the plants from getting sick. After the whole branch is vine, the lateral branches will be born in the lower part of the stem, which should be erased in time to ensure the normal nutrient supply of the main stem.
Refinement of Copper removing agent and Decoppering Agent through Lead Fire Process
Copper removing agent, lead copper removing agent, lead fire smelting copper removing agent, lead refining copper removing agent, lead copper removing agent for export, crude lead fire smelting copper removing agent, No. 2 lead refining copper removing agent
Bismuth is the impurity which is the most difficult to remove during fire refining of crude lead. lead fire process refined debismuthizing agent is prepared and produced by Luanchuan Hengkai Metallurgical Materials Sales Co., Ltd after research and development for many years. The lead fire smelting novel copper removing agent is prepared and produced by our company. After the copper removing agent produced by our company is used, the copper content in the lead after copper removal is within 0.0002. More importantly, after the copper removing agent produced by our company is used, no pollution is produced (no smoke), the emission of sulfur dioxide is reduced, there is no low-altitude pollution, the operation is simple for workers, the operating environment is improved, and free technical guidance is given for the first-time use.
"Hengkai Metallurgical" brand patent products (patent number: 201808178848) is environmental protection copper removing agent 1#. Environmental protection formula copper removing agent 2# belongs to upgrade products of the copper removing agent 1#. After the copper removing agent produced by our company is used, the copper content in the lead is less than 0.00015 after copper removal. The product is characterized by small usage, no pungent smell, no low-altitude pollution, easier operation and low slag rate. Product advantages: the content of existing copper removing agent in the market is 6%-10%, which is lower than ours. Currently, the company is the only one in China that has passed EIA acceptance. The company adopts the most advanced independently-developed automatic production line to produce copper removing agent. The annual output is 15,000 tons, and the moisture content is less than 0.01%.
Luanchuan Hengkai Metallurgical Materials Sales Co., Ltd. is a domestic professional R & D and production manufacturer engaged in lead smelting copper removing agent and lead-refined debismuthizing agent. The company cooperates with a number of scientific research institutions, and it has abundant strength in independent research and development, design automation assembly line operation, production and examination, which has formed the production capacity of 30,000 tons in copper removing agent, debismuthizing agent, iron sulphide, Ferro sulphur , alloy sand, ferrous sulphide, Pyrite and other series products. It is one of the domestic production enterprises with the largest scale. The company passed the ISO9001 international quality system certification in April 2018. The patented products (patent No.: 201808178848) "Hengkai Metallurgical" brand copper removing agent and ferro sulphur gain consistent praise from clients after innovation, research and development and improvement by the clients for many years due to high product quality and cheap price. It supplies goods to most domestic lead smelting enterprises throughout the year with stable business relationship. Its market share is 70%. Its products are exported to more than 10 countries and regions. Its share in the southeast Asia market is 80%. The company belongs to a reliable partner and service provider.
Hengkai metallurgical company sincerely welcome customers at home and abroad to visit the guidance, negotiate cooperation!
(In addition, our company is specialized in the production of `Hengkai Metallurgical" Brand - ferro sulphur series for foundry, copper removal agent series for lead smelting, debismuthizing agent for lead smelting, iron sulphide series for resin grinding wheel abrasive industry, iron sulphide series for brake pad friction industry, iron sulphide series for heavy metal wastewater treatment, iron disulphide series for soil improvement, iron disulphide for lithium battery anode, alloy sand series for wear-resisting flooring industry, ferrous sulphide powder series for ferrous sulphide cored wire, ferrous sulphide for ferrous sulphide cored wire, iron sulphide for resin grinding wheel, ferrous sulphide powder for heavy metal wastewater treatment, ferrous sulphide powder for soil improvement, ferrous sulphide cored wire, pyrite, ferrous sulphide ore, molybdenum oxide, high purity molybdenum trioxide, ammonium molybdate, titanium dioxide, cryolite powder, mullite, etc.)Copper remover quality certification Copper remover copper removal agent for
LUANCHUAN COUNTY HENGKAI METALLURGICAL MATERIALS SALES CO.,LTD , https://www.pyritechina.com