For floor purchase, consumers mostly consider the variety and quality. In fact, we must pay attention to some small details on the product.
De Pin floor  One ground wood floor
â—†Misunderstanding: Do not trust floor waterproofing
In recent years, some manufacturers of laminate flooring have introduced a floor that is not afraid of water. According to experts, the base material for the laminate wood flooring is crushed with logs. After high-temperature cooking to eliminate various molds, hot glue is added to the rubber. High-quality high-density boards contain more than 95% of wood, and the wood is afraid of water. Therefore, strengthening the floor is also afraid of water. “Soaking in water for 24 hours†is the standard method for floor moisture inspection, and does not mean that the product itself can be soaked in water for 24 hours. Some products use large amounts of low-cost ordinary urea-formaldehyde glues and even phenolic resins that cannot be used indoors as adhesives. The moisture resistance performance is improved, but the environmental standards cannot be met. The use of products with excessive levels of pollutants is harmful to human health. , And not as real business is not afraid of water, if you will be soaked in water after the "not afraid of the water floor" and no bubble over the water compared to the floor or can clearly see the size of the product has undergone great changes.
Experts specifically stated that any wooden product is afraid of water and there is no waterproof floor at all. If the floor of the home is soaked with water, the floor should be lifted to allow the water under the floor to evaporate out, so as to avoid excessive moisture generation under the floor and mold, and harm human health.
â—†Misunderstanding: strengthen the floor 12 mm better than 8 mm?
The market has circulated a claim that strengthening the floor of 12 mm is better than 8 mm. Some small and medium-sized enterprises and businesses in China have sounded the poor sound of the flooring and blamed the thickness of the floor. This is misleading.
In fact, the main reason for floor stiffness and sound is the high density of the substrate and direct contact with the ground. The high density is the basis for the long service life of laminate flooring, and there are now methods to effectively improve the feel and sound of laminate flooring. After years of research in Europe, the optimal thickness of laminate flooring is 8 mm. The most critical issue is that if the flooring is thickened, the cost of the base material will increase with the increase of wood fibers. The cost of 12 mm is usually 8 mm thick flooring. 1.3 times more. However, the price of 12-mm-thick laminate flooring is not high. The reason is that in order to make the floor price more competitive, the use of substrates with less than the specified density or even inferior substrates not only has poor physical properties, but also What's terrible is that formaldehyde has been seriously exceeded. Floors that use inferior substrates will change with the temperature and humidity of the room. In the short term, the floor will be deformed, and the damage will be severe, and it will endanger the health of the family. In addition, for households using standard heating systems, the heat transfer performance of thickened floors is greatly reduced. Therefore, consumers should rationally view the thickness of laminate flooring to avoid blind selection.
Misunderstanding: The more locks are not better
For the first generation of reinforced wood flooring, the tongue and groove socket structure is adopted. When the installation is completed, glue is filled in the tongue and groove to ensure that the seam does not occur when the floor is in use. The actual use found that China's ground level difference is too large (up to 10mm / m, the standard requirements of less than 2mm / m), the workers installed not serious enough, playing glue uneven, playing unhappy, some parts of the floor will appear cracking cracks. The merchant then introduced a thicker plate and a locking plate to solve the above problem. Some businesses have added “locking†functions to publicity, resulting in so-called “double locks,†“three locks,†and “four locks†floors, giving consumers a higher level of lock and quality. The better impression.
In fact, whether the floor is connected firmly is not the number of lock stages, but the chamfering angle and chamfering area of ​​the lock plate. Too much lock level is like using a few small locks to prevent theft. Is it safer than using a big lock? The earliest manufacturers produced locking plates for ease of installation and increasing the connection strength of the floor, and in the end, they developed a series of locking bars to produce multiple locking floors for deceiving consumers.
Links: Decoration Classroom: Top Ten Reasons to Choose Wood Flooring as Geothermal Flooring
Floor Knowledge: Analysis of advantages and disadvantages of carbonized flooring
Flooring purchase Nature Flooring Del Floor Interior Decor Home Decoration Formaldehyde
MAPP Torch is characterized by instant on/off trigger ignition provides easier lighting and increased fuel savings. The propane blow torch is with large, optimized swirl flame burns hotter. High intensity flame for maximum heat output provides 30% faster soldering time. Plumbers Gas Torch can be divided into torch with or without self ignition.
The advantages include:
1. Adjustable flame control allows for a more precise time;
2. Run lock button keeps torch lit for finger-free use;
3. Pressure regulated for consistent performance;
4. Cast aluminum construction provides added durability.
Packaging: Standard export package or Customized
Payment: L/C,D/P,T/T,Western Union
Delivery: NINGBO CHINA, 30 days after payment
Packaging: Standard export package or Customized
Payment: L/C,D/P,T/T,Western Union
Delivery: NINGBO CHINA, 30 days after payment
MAPP Torch
MAPP Torch,MAPP Gas Torch,Plumbers Gas Torch,Propane Gas Torch
UWELD TECHNOLOGIES CO., LTD. , http://www.uweldco.com