Chemical Standard Pump is a medium-sized pump used to treat liquids in the chemical and petrochemical industries, refineries, heat transfer fluids. The size and performance range is according to 22858 (2858). The entire range is so subdivided that the best efficiency of all conditions of service is guaranteed. The maximum capacity of up to 700 m 3 / hour or 3080 gallons. With a wide selection of materials and shaft sealing systems, chemical pumps are suitable for almost any liquid, usually in the above industries. For example, we call acids, alkalis, solvents, hydrocarbons, heat transfer fluids, liquid sulfur, heavy oils, and asphalt melted plastics. Chemically standard single-stage volute pump, single-ended design pulled out, with one end suction flange and flange centerline discharge. Housing and intermediate housing, shaft seal and impeller is a mounting unit. Pull out the design unit with the back can not remove the pipe joint. If the use of space coupling, but also can remain fixed in the floor. The standard design of the pump housing is cast in one piece and mounted on the soles of the feet. The enclosure is airtight, non-asbestos gasket. If required, specially designed for use: Pump heating Jacket If the temperature of the liquid that needs to be lowered, through the pump or liquid, the temperature is below the melting point For example: Datang Microelectronics, sulfuric acid, etc. Heating jacket Volute and middle sleeve welding The cover is designed to heat liquids up to 24/350 and 220/430 °°F
PU Tube,R. O. Filter,R. O. Water
Fenghua Jade Motor Co., Ltd. , http://www.composite-hose-supplier.com