★ Acceptance of paint
1. Whether the surface of furniture oil is saturated or not. Make sure there are no blisters, no cracks, and that the paint thickness is uniform and consistent in color.
2. Whether the surface of the furniture varnish has the same thickness, the paint surface is saturated, clean, and there is no particle.
3. Whether the emulsion paint on the wall surface is smooth and uniform, there is no hollowing, blistering, cracking phenomenon.
4, wood and plaster ceiling paint is generally latex paint, the surface should be flat, there is no crack at the board junction.
5. Whether the connection of the ceiling angle line is smooth, there is no obvious misalignment and deformation.
6, wallpaper patchwork is not accurate, no tearing phenomenon. Patterned texture patches should be accurate and error-free.
7. Whether there is no pollution on the wall or no stains.
★ Acceptance of woodworking
The acceptance of woodworking is mainly reflected in:
1, the structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.
2. Is the corner accurate? The normal corners are all 90 degrees, except for special design factors.
3. Whether the parquet is tight and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.
4. Whether radian and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape.
5, cabinet door switch is normal. When the door is open, it should be light and no noise.
6, the fixed cabinet wall should generally have no gaps.
7, whether there is a broken woodworking project. It should ensure that the surface of the woodworking project is flat and there is no drum or breakage.
8. Is the symmetry carpentry project symmetrical?
9, decorative panel nails have no make up. Of course, this is the painter's job, but as it exists in the woodworking project, it is mentioned here.
10. Whether the connection of the ceiling corner line is smooth or not, and whether there is obvious unevenness or distortion.
11. Whether the skirting line is straight and accurate off the ground.
12. The ceilings of toilets and kitchens, such as aluminum gussets and PVC gussets, are flat and have no deformation.
13, the door handle locks the installation position is correct, open normal.
14. Is the bedroom door and other doors open? When closed, the upper, left and right door joints should be tight, and the lower door gap should be moderate, generally 0.5 cm.
★ Mason acceptance
1. Whether the brick surface is flat or not inclined.
2. Whether the gaps in the brick surface are regular and consistent.
3. Whether the toilets, balconies and kitchen floor tiles with floor drains have sufficient self-drainage inclination.
4. Does the brick surface have broken and chipped?
5, the tile direction is correct, there is no reversal phenomenon.
6. Whether the tile and waistline position is correct, there is no misalignment or height error.
★ Acceptance of metal engineering
1. Whether the metal body structure is straight or flat; if the form part, it is required that the closure such as a strip of glue be completed.
2. Whether the metal form is flexible and has no obstacles.
(3) Whether the pipe joints of security nets, security doors, etc. have been polished, have a stable placement, and have no loosening phenomenon.
4. Whether the specifications and wall thickness meet the requirements.
5. There is no leakage of rain between the window and the window.
★ miscellaneous acceptance
1. According to the stipulations of the contractual project, whether or not the project projects are all completed shall be checked one by one.
2. Are all the lights on?
3. Whether the engineering waste has been completely cleared.
4. Whether the sanitary fixtures and other installations are installed correctly, whether the toilets include water storage and flushing are normal, and whether the basin drainage is normal.
5, there is no blockage in the floor drain.
Three trees Lacquer paint Lacquer paint Lacquer furniture Toilets Bedroom Doors Doors Kitchen cabinets Doors Bedroom doors Bedroom lamps Bedroom tiles Tiles Tiles Tiles Specification Kitchen tiles Balcony Tiles Bedroom lamps
Straight Cutted Iron Wire
1. Material: Black annealed Wire , Galvanized Wire , Pvc Coated Wire, Stainless Steel Wire
2. Gauge: BWG8-BWG23
3. Length: 100mm – 1000mm
Straight Cutted Iron Wire
Specification Wire Diameter
20cm-60cm 0.7mm-1.6mm
60cm-6m 1.6mm-4.0mm
Name Wire Diameter Length
Mild Steel Tie Wire 0.6 According to customers requirements.
0.7
0.8
0.9 1.0
1.2 1.45
1.5
Straight Cutted Iron Wire uses in binding up construction materials or other items. Straight cut wire is made with Galvanized Iron Wire straightened then cut into pieces of various length according to your requirement.
Packing: bundle weight according to order
Packed by woven bag/carton and pallet
Straight Cutted Iron Wire
Straight Cutted Iron Wire, Galvanized Wire,Straight Steel Wire
Dingzhou Hongye Wire And Metal Products Co., Ltd. , http://www.chinawiremetals.com