In winter, it is the high season of “accidents†in solid wood flooring. The winter climate, especially in northern China, is relatively dry. Although the southern climate is relatively less dry, due to the wide use of heating equipment, the indoor environment will also be relatively dry and low humidity. The dry climate is prone to dry cracking of solid wood flooring and must be paid attention to.
Part1: Winter maintenance solid wood floor maintenance precautions
Solid wood flooring is very sensitive to temperature and humidity. In winter, how to prevent the life of solid wood flooring from decreasing due to the influence of temperature and humidity? This is a problem that we are all very concerned about. Let's take a look at the winter solid wood floor maintenance, what should pay attention to.
1, increase indoor humidity
Many owners may think that in the winter, the outside air will come in, the temperature in the city will drop, and the phenomenon of floor separation will naturally weaken. In this regard, experts say that the real reason for the floor to appear from the seam comes from humidity, not temperature. In addition, the higher the air temperature, the more water is saturated, which means that the humidity in the house is higher than that in the outdoor. At this time, the cold air outside will be exchanged, which will only make the room dry. Equipped with an air humidifier is very direct and effective. Experts revealed that the humidity of the room is best controlled at 50%-60%.
For the first time, use geothermal heating. Be careful to heat up slowly. If the temperature rises too fast, the floor may be cracked and twisted due to expansion. “And the use of geothermal heating, the surface temperature should not exceed 30 ° C, at this time the room temperature in the body's most suitable ambient temperature of 22 ° C below, the life of the floor can also be guaranteed." Experts also said that when the weather is warm, indoors are no longer When heating is required, care should be taken to turn off the geothermal system and take it slowly. Do not drop suddenly, otherwise it will affect the service life of the floor.
3, regular solid wax
According to relevant experts, there is a certain amount of water remaining inside the solid wood floor. In the case of geothermal heating in the winter, the floor loses water and shrinks, and the gap between the floors increases. At this point, applying a solid wax to the floor will reduce the extent of the expansion.
4, avoid contact with a large amount of water and acid, alkaline liquid
Try to avoid the wooden floor from contacting a lot of water; avoid wiping with acidic or alkaline liquids to avoid damaging the finish of the floor paint.
Part2: Avoid misunderstanding of solid wood floor cleaning and maintenance misunderstanding
Due to various reasons, many people do not understand the solid wood floor, they will step into the misunderstanding of maintenance. Based on our experience, we have compiled a misunderstanding that most people can easily enter to help families.
1, over-maintenance
It is a mistake to repeatedly mop the floor with a wet mop several times a day. Below we will introduce the cleaning method for solid wood flooring.
2, neglect maintenance
Ignore maintenance, do not clean for a long time, do not pay attention to ventilation, the situation is not timely repair, if you do not report repair after a long time, it will easily lead to warping and even repair.
3. Mop the mop with water or scrub with alkaline water or soapy water.
Keep the floor dry and clean. Do not use the mop to wet the mop or scrub with alkaline water or soapy water to avoid damaging the brightness of the paint and damaging the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop.
Part3: Clean way to make the solid wood floor update more beautiful
How to clean solid wood flooring? This problem is easily overlooked. In fact, the cleaning of solid wood flooring is very particular, not like other flooring. If you are often mopping the floor of solid wood, it is very harmful to the floor. Let's take a look at how to clean.
1. If the surface of the plate is inadvertently stained, it should be removed in time.
Grease, paint, and ink can be wiped with special stains: If it is blood, juice, red wine, beer, etc., you can wipe it with a damp cloth or a cloth with a proper amount of cleaning agent; do not use strong acid and alkali liquid to clean the floor.
2, regularly clean the floor
Regularly sweep the floor, vacuum, prevent sand or frictional dust from accumulating and scratch the floor surface. Place a doormat outside the door to avoid sand or friction dust from entering the room.
3. If large-scale flooding occurs inadvertently or partially soaked in water for a long time.
If inadvertently, large-scale flooding or partial immersion in water for a long time, if there is water in Mingshui Mingshui, it should be dried with a dry cloth and allowed to dry naturally. It is strictly forbidden to use electric heater to dry or in the sun. Exposure.
4, keep the floor dry and smooth
The humidity in the room should not be too large, keep the floor dry and smooth, and use daily cleaning with a wringed cotton mop: in case of stubborn stains, wipe it with a neutral cleaning solvent and then wipe it with a tamped cotton mop. Do not use Scrub with an organic solvent such as acid, alkaline solvent or gasoline.
1, Materia: NBR, CR, SBR, EPDM ,HNBR, ACM, IIR, NR, EP, Silicone, Viton etc.
2, Hardness: Between 30~90 shore A
3, Property: high/low temperature ( -40°C to +100°C ) resistance,oil and fuel resistance, weathering resistance, Ozone resistance etc
4, Certification: ISO9001: 2008, ROHS, FDA
5, Packing: plastic bag&carton box or according to your requirements.
6,Application: electronic field, industrial machine& equipment, house-hold appliance,
tele-communication, automobile, medical equipment industry etc.
7, According to your drawings or samples.
8, OEM or ODM is welcomed: 3D,CAD drawing accept
Hydraulic Hose Fittings,Brass Hose Fitting,High Pressure Hydraulic Fitting,Hydraulic Hose Pipe Fittings
Hebei Lanwei Imp. & Exp. Co., Ltd. , http://www.hblanwei.com