ã€China Aluminum Network】 Aluminum alloy T6 treatment is a solution treatment plus artificial aging treatment, as long as the aluminum alloy of different compositions is solid solution treatment plus artificial aging treatment can be called T6 treatment, indicating its heat treatment status.
Aluminum alloy casting T6 heat treatment process program: heating - insulation - quenching - aging.
Preparation before heat treatment (equipment: aluminum alloy solid solution (quenching) furnace):
1, before heat treatment should check whether the heat treatment equipment, control systems and instruments are normal.
2. Castings shall be dry, oil-free, dusty, explosive, and other castings shall be classified according to their winning combination number, profile dimensions, wall thickness of the castings and heat treatment specifications before being installed in the furnace. Different grades shall not be mixed.
3, the shape of the castings are easy to produce warping should be placed on a dedicated chassis or bracket, not allowed to hang over the cantilever part, large castings should be placed on a dedicated rack on the furnace.
4. Single-cast or auxiliary-cast test bars for checking the performance of castings shall be heat treated together with the parts to determine the performance of the castings.
Heating and insulation:
1. After heating to the set temperature, check and correct the temperature of the furnace (°C) at any time during the heat preservation period to prevent local high temperature or burning.
2. When the power is turned off after a short period of time, the castings in the insulation should be rapidly quenched. After the equipment is returned to normal, the furnace, insulation, and heat treatment are performed. The total holding time should be slightly extended.
Blast cooling:
1. After the insulation is completed, open the furnace door and lower the material basket to quickly drop the casting into the pool and quench it in the specified cooling medium.
2. The quenching transfer time refers to the time from the casting of the casting to the quenching of all the castings into the medium. The total time is better not to exceed 15 seconds.
Correction of casting deformation:
1 The deformation of the casting should be corrected immediately after quenching. The correction mold and tools should be prepared before quenching.
2 According to the characteristics of castings and deformation conditions to choose the appropriate correction method, the force should not be excessive when correcting, it should be slow and uniform.
Aging operation: (equipment: aluminum alloy aging furnace):
1. Castings requiring artificial aging shall be treated within 0.5 hours as soon as possible after quenching. The quenched baskets can be pushed directly into the aging furnace, but the product temperature must not exceed the aging temperature.
2. Set the temperature of the automatic temperature control instrument and then send it to the electric heater to turn on the fan.
3, after the holding time, disconnect the power.
We produce different type articles out of normal steel stainless steel, brass, aluminum and zinc. such as shackle, turnbuckle, thimble, Wire Rope Clip, lifting hook, Snap Hook, quick link, eye bolt, eye nut, Load Binder, chain... Therefore, many items can be made according to customers drawing or sample, they can be at forging, casting, pressing, welding and machinery.
Rigging Hardware
Lift Ring,Lift Hook,Snap Hook,Rigging Hardware
Qingdao Xiangchengde machine , https://www.xiangchengda.com