There is no choice of toilets in the bathroom. Different consumers like different styles of toilets. The toilet has a squatting pan and a toilet. Which type of toilet is best? Different types of toilets have different requirements, and the size of the toilet is different from the size of the toilet. Among them, the squatting pan is a type that many friends prefer. How should the bathroom squatting size be matched? And small series on the go with our good home network and see!
1. Check if there is any foreign matter in the drain pipe and the product passage before installing the squat pan.
2. Try to fix the installation position and height of the squat and the squatting device after the sewage outlet and the sewage pipe are docked .
3. Install the inlet water and water tank. The inner diameter of the inlet pipe is about 28mm. The distance from the bottom of the tank to the inlet of the squatting tank is 1500mm-1800mm. If the installed hand pressure is above 0.2Mpa, the water consumption is 9 liters.
4. After the flange rubber ring is placed on the inlet pipe, it is docked with the squatting device, and then the squatting device is fixed. When fixing the mounting surface, the front, back, left and right of the squatting pan must be leveled and reused. The glass glue or cement sand pad seals the interface between the product sewage outlet and the sewage pipe.
Five steps to buy a squat pan
1, look at the whole
Well-known storefronts have their own characteristics, with model rooms, and put a variety of qualifications that can prove their strength in a more obvious position. Whether the sample is placed neatly and beautifully can reflect the importance and care of the manufacturer's brand from one side.
2, touch the surface
The glazed surface and the green body of the high-grade squatting surface are relatively delicate, and the surface of the hand touch does not have a rough feeling. The glaze of the middle and low-end squatting pans is dark, and under the illumination of the light, there will be pores, and the glaze and the body are rough.
3, 掂 component
High-grade squatting pans must use high-temperature ceramics in sanitary ceramics. The firing temperature of this ceramic is above 1200 °C, and the material structure is completely transformed into crystal phase, which produces a glass phase with extremely dense structure, which meets the requirements of all-ceramics of sanitary ware. The handcuffs have a heavy feeling. The medium and low-grade squatting pans are made of medium- and low-temperature ceramics in sanitary ceramics. These two ceramics cannot achieve complete phase transformation because of the low firing temperature and short firing time. Requirements.
4, specific water absorption rate
The most obvious difference between high-temperature ceramics and medium- and low-temperature ceramics is the water absorption rate. The water absorption rate of high-temperature ceramics is less than 0.2%. The product is easy to clean and does not adsorb odor, and does not cause glazed cracks and partial water leakage. The water absorption rate of medium and low temperature ceramics is much higher than this standard and it is easy to enter the sewage. It is difficult to clean and emits unpleasant odor. Cracks and water leakage may occur over time.
5, test flushing <br> For the squatting pan, the most important function is flushing, and the design of the squatting pipe is scientific and reasonable, is the biggest factor affecting the flushing.
Through the above introduction, do you know the matching skills of the squatting pan? If you want to know more, follow us on the official website of our website!
Thymosin Beta 4 Acetate,Cas 77591-33-4,Thymosin Beta 4 Acetate 98%,77591-33-4 In Stock
HENAN BON INDUSTRIAL(CHEMICAL) CO.,LTD , https://www.bonchemical.com