A centrifuge is a machine that uses centrifugal force to accelerate the separation of different materials that need to be separated. According to the Xiaobian of Wanquan Hardware Machine Grid, centrifuges are widely used in chemical, petroleum, food, pharmaceutical, mineral processing, coal, water treatment and shipbuilding sectors. It is mainly divided into two categories: filter centrifuge and decanter centrifuge.
1. Understand the overall situation
The driving method used by the centrifuge: Some centrifuges use dual-motor drives; some centrifuges use drums and spirals driven by separate hydraulic systems. Different driving methods have their own advantages and disadvantages. As a user, pay special attention to the operational problems that may be caused by its shortcomings. Pay attention to the installation during installation, and make specific tests for its shortcomings during commissioning to avoid various hidden dangers.
2. Pay attention to the installation process and strictly control the quality of the installation.
The centrifuge is running at high speed, so it needs to be kept in a horizontal state. The centrifuges are all installed on site, and the installation conditions are difficult to guarantee. It is likely that the operation vibration in the future will be too large due to improper installation in the early stage, and even the spiral wear will be severe. Therefore, the most important thing to pay attention to when installing and placing is to maintain the level. Pay attention to the piping and other equipment of the unit.
3. The importance of prior data
Recording some important raw data is useful for comparing the equipment during operation to understand the wear or aging of the equipment. It is recommended that all types of centrifuges be commissioned at the beginning of the commissioning, recording the time from the start of the single machine (from the time the switch is turned on, the time it takes to flush to the actual operation) and the current at the start of operation. Of course, other corresponding states should also be recorded. During operation, these data should also be monitored. If there is a large deviation from the original data, it should be immediately identified and disassembled to check the internal situation if necessary.
Be sure to pay attention to these problems during installation to ensure the normal use of the centrifuge.
Concerned about surprises
Label: Classification of centrifuges and introduction of installation process
Previous: What are the classifications of the guide rails of CNC machine tools? Different guide rails Next: How to do the rust oxidation of the lock surface? Lock material and table
Longneng demolition hammer quality is top in the china.The 608 bearing is C&U.The power is very high.The speed also would be more quickly.
Longneng demolition breaker use easy changing chuck to make work easy and fast.
In the future,we will have magnetic motor demolition hammers.Hope more customer will visit our website and inquiry ours products.
We will give you more super happy for your working.
LONGNENG Demolition Breakers, LONGNENG Demolition Hammers, Electric Demolition Hammer, LONGNENG Demolition Breaker Hammer
Yongkang Longneng Power Tools CO., LTD. , http://www.longnengtool.com