Embedded explosion-proof clean fluorescent lamp performance characteristics

Explosion-proof fluorescent lamps are explosion-proof discharge lamps that mainly excite phosphors and luminesce with ultraviolet radiation generated by discharge.

Embedded explosion-proof clean fluorescent lamp features:

1. The lamp body transparent parts are made of reinforced carbonate material, which has high strength, strong impact resistance, high temperature resistance, and cold resistance.

2. The light source adopts the latest generation of T5 ultra-fine fluorescent lamps and has the following features: a. The lamp length is short, with more accurate lighting control; b. High luminous efficiency, more in line with the actual lighting environment, the luminous efficiency of the lamp can be as high as 1041lm/ W; c, with long switching times and service life, life up to 20,000 hours; d, has a high lumen maintenance, slow light decay, lumen maintenance rate of up to 92% after 10000 hours; e, improve beam distribution, significantly High color and energy saving.

3. The reflector is curved and the beam distribution is more reasonable.
Explosion-proof clean fluorescent light (embedded)

4. The built-in ballast is a special explosion-proof electronic ballast, which has short circuit and open circuit protection functions. It is equipped with a prevention circuit for the aging effect and leakage phenomenon of the lamp, so that the lamp can work normally and the power factor can be as high as 0.98 or more. With a wide voltage output, it can work normally in the voltage range of 170V to 250V, and it can maintain constant power output without affecting the output light efficiency.

6. The fluorescent lamp body and the transparent cover are in the form of snaps. The combination is tighter. Specially designed sealing strips and double seals are used to provide better protection.

7. The maintenance is simple and easy to open and close simply by inserting a screwdriver into the small mouth of the buckle.

8. The inside of the lamp is equipped with an explosion-proof travel switch, and an open-closed power-off interlock device is configured.

9. Emergency equipment can be installed according to user requirements.

More than 10 installation methods, can be embedded and ceiling mounted.

Compared with the general Kitchen Knives, utility knives are more compact and lightweight, with the advantages of convenient portability, suitable for outdoor using. The Utility Knife can be divided into the blade surface fixing, the blade face is not fixed, folding, telescopic, and pocket Knife,etc. Folding utility knives and telescopic utility knives are also found in the work, cutting a variety of small materials, kaifeng documents, cutting tape, cut rope and so on. This type of tool blade is thinner but with a sharp edge. According to various usage, we have designed a variety of utility knives,it must be one the suitable for you.

Utility Knife

Utility Knife Kitchen,Utility Knife,Serrated Utility Knife,Pocket Utility Knife

YANGJIANG TRI-WIN INDUSTRY & TRADE CO.,LTD , https://www.triwintableware.com