Nuclear power "going out" to warm up again, China and Pakistan signed a $34 billion investment agreement to build large-scale nuclear power plants, subways and light rail stations.
In his speech at the Davos Forum in the winter of 2015, Premier Li Keqiang once again stated clearly that “the innovative ways of investing in foreign investment, China’s high-speed rail, nuclear power, aviation, telecommunications and other advantageous industries will go out and meet the local market demandâ€. The China-Pakistan investment agreement is another breakthrough in China’s nuclear power “going out†after Li Keqiang’s voice again promoted nuclear power to the sea.
Pakistan was the first country to cooperate with China in nuclear power plant construction. In June 2000, the Chashma nuclear power plant in Pakistan, which was undertaken by CNNC, was connected to the grid. The second phase of the Chashma nuclear power plant was completed at the 60th anniversary of the establishment of diplomatic relations between China and Pakistan. Start grid-connected power generation. The Karachi project in Pakistan is another important goal of CNNC at present. The project cost is 9.59 billion yuan and is expected to be completed within 6 years.
In addition to the Pakistan project, the Hinkley Point nuclear power project in the UK, which is jointly participated by CGNPC and CNNC, is also expected to make important breakthroughs in the near future. According to Song Xudan, CEO of EDF China Holdings, the project is expected to be completed in the first quarter. The signing of the contract is currently being studied in depth with the British government on the details of the agreement, and the signing of the specific contract is just around the corner.
Unknowingly, nuclear power, a high-end technology field, also has Chinese companies. It is no longer limited to countries with a good tradition of our country, but has gradually developed into such established countries as the UK. Due to political reasons such as ideology, such countries have long been excluded from the market share of Chinese companies. As the business icebreaking journey goes further and further. The capital market is already helping, which objectively proves the increasingly strong competitiveness of Chinese companies.
However, we must also admit that mainland companies have not really entered the international market in this regard. Relatively speaking, some electrical companies in Taiwan, Taiwan, are ahead of us. Products such as terminal blocks and rotary terminals of Machiyang and Gold Pen have already entered the international market and competed with traditional European and American companies. If mainland companies want to go better and more stable, there are still many things to learn from.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
PP plastic, polypropylene, commonly known as "baijiao",Scientific name: polypropylene.
Description:
PP Plastic is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP Plastic don't have the problem of environmental stress cracking.Polypropylene (PP Plastic) is a semi-crystalline thermoplastic.PP Plastichas high impact resistance, strong mechanical properties, resistance to many organic solvents and acid and alkali corrosion.
PP Plastic is widely used in industry and is one of the most common polymer materials.
Australian COINS are also made of polypropylene.
Polypropylene bonding:
K-720 is suitable for polypropylene PP plastic adhesion, suitable for large area plate lamination, high transparency, suitable for PP adhesion PP, PP adhesive PC, PP adhesive ABS,PP adhesive PVC, PP adhesive acrylic, PP sticky metal, PP stick wood.
K-7007 adhesion performance is roughly the same as k-720, light yellow and more economical.
K-620 is adhesive small area polypropylene PP glue, must be used with the k-650 treatment agent, the instant positioning, the strength is high.
Advantages:
1. Low density;
2. Heat resistance ;
3. Non deformation;
4. High stiffness;
5. High surface strength;
6. Good chemical stability;
7. Nontoxic and safe.
Disadvantage:
The main disadvantage of the fault polypropylene is that the high temperature rigidity is not enough, and the low temperature is brittle.
Poor environmental tolerance, outdoor use, easy to turn yellow and brittle.
Tensile strength of anisotropy, the products are easy to deform, continuous use of low temperature, high creep performance, and long - term load.
Poor printing performance.
Application:
1,Valve part, drinking water and sewage water pipe,
2,Sealing element, spraying carrier,
3,Corrosion-resistant trough and barrel, industrial applications that have acid and alkali-resistant requirement; wastewater and gas discharge equipment for industrial purpose,
4,Scrubbing tower, clean room, semiconductor plant and other related industrial equipment and machinery, food machinery and chopping board,
5,Electroplating process, toy part
Combustion characteristics: PP Plastic easy to burn, polypropylene from continue to burn after the fire, with the top of the flame is yellow, the bottom made in blue, with a small amount of smoke generated, burning melt dripping, and oil.
Specification: the thickness of PP sheet material can be produced from 0.3mm to 2mm, and the PP sheet material is of rolling material and width of 500-1000mm.
The thickness of the plate can be produced from 2mm to 200mm. The specification is 600*1200mm 1000*1000mm 1000* 2000mm. Other specifications can be customized as needed,and The diameter of the PP rod can be produced from 2mm to 250mm, the length is 1 meter, PP rod can be ordered to be more than 3 meters in length.
Color: white and black, other colors can be customized
Modified varieties: PP sheet have various enhancers and other auxiliaries can be added to make modified varieties, depending on the requirements
Storage methods:
Keep in tight, cool and dry place to ensure good ventilation
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
PP Plastic Sheet,Polypropylene Plastic Sheet,High Hardness PP Sheet,Non Deformation PP Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com