This type of foamed plastic board is relatively new material, but its use is really not small. It can be said that it is also widely used in building materials. Following small to tell you about the use of price analysis and foam board foam board is.
The use of foam plate analysis
1. Foam Plastic Board This product mainly protects the main structure of the building and can also extend the life of the building. As the external insulation is to put the insulation layer on the outside of the structure, it can also reduce the stress caused by the structural deformation caused by temperature changes, and the most important thing is to reduce the harmful substances in the air and the erosion of the UV rays on the structure.
2, foam plastic board This can also effectively eliminate the "thermal bridge" in the past using insulation, "thermal bridge" is difficult to avoid, and external wall insulation effectively prevent the generation of thermal bridges, so that condensation can be avoided.
3, foam plastic board This product can make the wall tidal temperature situation has been improved, the general insulation needs to set up vapor barrier layer, and the use of external insulation materials, thermal performance far more than the main structure, in the wall inside the general Condensation does not occur, and the entire wall temperature of the structural layer can also increase the thermal insulation of the wall.
4, foamed plastic board This product is also conducive to maintaining room temperature stability, and it is mainly the use of external wall insulation, due to the wall heat storage capacity of the structural layer in the wall inside, this is also conducive to maintaining room temperature stability.
5, foam plastic panels can increase the area of ​​use of the house, such products can play to avoid the secondary decoration of the insulation damage.
What is the price of foam board ?
Foam board also has a very good cushioning performance. Its main function is to make the packaging from shock and drop, pressure and other protective effects; the heavier the weight, then it shows that the product's density is greater, the hardness It is harder. However, it is still a little thin relative to the thickness of 1 cm, so the effect of protection does not reach the effect you want. Here is the best recommended thickness of 1.5 cm or more, so the buffer effect is much better. If you want to mention from the aspect of hardness, the material of 9kg is slightly softer (but it can be considered if the cost is low, the effect of adding a little thickness is similar); we recommend 12kg of material, moderate hardness, suitable for most packaging protection. , It is a material with higher cost performance; 15 kg of material is of medium and high hardness, suitable for those who require higher packaging; 18 kg of material is generally hard material, suitable for heavier items, but also for other purposes (insulation , model, etc.); 25 kg of material is a special hard material, and its hardness is similar to that of a molded foam box for packaging electrical appliances. As for its price, it depends on the thickness of the material you choose. There is no uniform standard.
Summary: The use analysis and foam board foam board price on how much content on the introduction to this, the use of foam board is quite large, you can use it not only heat, but also to extend the life of the building under construction, but Choose the right product to achieve the effect you want.
Chloride, Salt
YIBIN PERFEC INTERNATIONAL TRADE CO.,LTD , https://www.yibinbofei.com