Xiao Bian brings the main points of attention for the installation of fully automatic barrier-free access for the three-roll gate ramp. Compared to everyone, we will find that the original three-roll gate combined with barrier-free access can become so convenient and shorten the travel time. It also creates a good atmosphere of harmony and mutual assistance for society. What we are explaining for you today is the point of attention for installing the entrance of the three-roll gate. I hope everyone can combine the installation of entrances and exits with the installation of ramps. Make the channel more convenient for everyone.
1) Inside and outside entrances of large and medium-sized public buildings shall have no less than 2.00mX2.00m wheelchair rolling area, and no less than 1.50mX1.50m wheelchair rolling area shall be reserved inside and outside the entrance of small public buildings.
2) There is a shelter shelter at the entrance of the building, or there are two doors in the hall and the hall. The net distance after opening the two doors should not be less than 1.20m.
3) Doors for disabled persons should first adopt automatic doors and sliding doors, followed by swing doors. Revolving doors and high-force spring doors should not be used.
4) The net width of the effective passage of the wheelchair through the automatic door should not be less than 1.0m, and the net width of the effective passage through the sliding door and the swing door should not be less than 0.80m.
5) When a wheelchair user opens a sliding door or a swing door, a wall width of not less than 0.50 m shall be left on the side of the door handle.
6) The door leaf opened by a wheelchair should be installed with a sight glass and a horizontal handle and a closed handle. A door panel with a height of 0.35 m should be installed below the door leaf.
7) The net width of walkways passing through a wheelchair in large and medium-sized public buildings should not be less than 1.50m. The net width of a small public building passing a two-way walkway should not be less than 1.20m, and there should be a 1.50mX1.50m wheelchair rolling area at the end of the walkway.
8) The floor of the walkway should be smooth, smooth, free of water and free of obstructions. When there are steps in the walkway, wheelchair-accessible ramps should be provided.
9) When the door leaf is opened in the walkway, an alcove should be provided. The depth of the alcove should not be less than 0. 90m and the width should not be less than 1. 30m.
10) Both sides of aisle building, traffic building and medical building walkway. An armrest with a height of 0.85m should be provided.
11) The width of the aisle A, which is mainly used for the handicapped and the elderly, should not be less than 1.80m.
Both sides of the B walkway must have a handrail with a height of 0. 85m.
The floor of the C walkway must be flat and non-skid and non-slip surface materials should be used.
D. In the lower part of the wall on both sides of the aisle, there should be a 0.35m high wallboard.
The corner of the E-walk bend should be designed as an arc wall or a 45-degree cut-off wall.
In the ground on the side of the aisle, a width of 0. 40m to 0. 60m shall be set on the ground. The inner edge of the blind shall be 0. 30m away from the wall surface.
There should be no obstacles in the G walkway, and the walkway illumination should reach 200LX. 3. Handrails 1) Handrails should be provided on the slopes, stairs and on both sides of the two-pole steps and on the three sides of the elevator. Handrails should be kept consistent.
2) The height of a handrail is 0. 85m to 0. 90m. When the second handrail is set, the height of the lower handrail is 0. 65m.
3) Handrails on ramps, stairs, and steps shall extend horizontally at least 0,30 m at the starting and end points.
4) The shape, size, and color of the handrail should be easy to identify and grasp. The size of the armrest section should be 35mm to 50mm, and the clearance of the armrest side to the wall surface should be 40mm.
5) The handrails should be made of high-quality wood or Other better materials. The handrails must be installed sturdy and should be able to withstand the weight of the body.
Shenzhen Hongshunmeng channel provides you with first-class access gates, wing gates, swing gates, three roller gates, and fast channel gates. If you need to purchase, please contact customer service or call the hotline to order. We are looking forward to your arrival.
1) Inside and outside entrances of large and medium-sized public buildings shall have no less than 2.00mX2.00m wheelchair rolling area, and no less than 1.50mX1.50m wheelchair rolling area shall be reserved inside and outside the entrance of small public buildings.
2) There is a shelter shelter at the entrance of the building, or there are two doors in the hall and the hall. The net distance after opening the two doors should not be less than 1.20m.
3) Doors for disabled persons should first adopt automatic doors and sliding doors, followed by swing doors. Revolving doors and high-force spring doors should not be used.
4) The net width of the effective passage of the wheelchair through the automatic door should not be less than 1.0m, and the net width of the effective passage through the sliding door and the swing door should not be less than 0.80m.
5) When a wheelchair user opens a sliding door or a swing door, a wall width of not less than 0.50 m shall be left on the side of the door handle.
6) The door leaf opened by a wheelchair should be installed with a sight glass and a horizontal handle and a closed handle. A door panel with a height of 0.35 m should be installed below the door leaf.
7) The net width of walkways passing through a wheelchair in large and medium-sized public buildings should not be less than 1.50m. The net width of a small public building passing a two-way walkway should not be less than 1.20m, and there should be a 1.50mX1.50m wheelchair rolling area at the end of the walkway.
8) The floor of the walkway should be smooth, smooth, free of water and free of obstructions. When there are steps in the walkway, wheelchair-accessible ramps should be provided.
9) When the door leaf is opened in the walkway, an alcove should be provided. The depth of the alcove should not be less than 0. 90m and the width should not be less than 1. 30m.
10) Both sides of aisle building, traffic building and medical building walkway. An armrest with a height of 0.85m should be provided.
11) The width of the aisle A, which is mainly used for the handicapped and the elderly, should not be less than 1.80m.
Both sides of the B walkway must have a handrail with a height of 0. 85m.
The floor of the C walkway must be flat and non-skid and non-slip surface materials should be used.
D. In the lower part of the wall on both sides of the aisle, there should be a 0.35m high wallboard.
The corner of the E-walk bend should be designed as an arc wall or a 45-degree cut-off wall.
In the ground on the side of the aisle, a width of 0. 40m to 0. 60m shall be set on the ground. The inner edge of the blind shall be 0. 30m away from the wall surface.
There should be no obstacles in the G walkway, and the walkway illumination should reach 200LX. 3. Handrails 1) Handrails should be provided on the slopes, stairs and on both sides of the two-pole steps and on the three sides of the elevator. Handrails should be kept consistent.
2) The height of a handrail is 0. 85m to 0. 90m. When the second handrail is set, the height of the lower handrail is 0. 65m.
3) Handrails on ramps, stairs, and steps shall extend horizontally at least 0,30 m at the starting and end points.
4) The shape, size, and color of the handrail should be easy to identify and grasp. The size of the armrest section should be 35mm to 50mm, and the clearance of the armrest side to the wall surface should be 40mm.
5) The handrails should be made of high-quality wood or Other better materials. The handrails must be installed sturdy and should be able to withstand the weight of the body.
Shenzhen Hongshunmeng channel provides you with first-class access gates, wing gates, swing gates, three roller gates, and fast channel gates. If you need to purchase, please contact customer service or call the hotline to order. We are looking forward to your arrival.
Hexagonal wire mesh fence,High Quality Hexagonal wire mesh fence,Hexagonal wire mesh fence Details
Hebei Giant Metal Technology Co., Ltd. , https://www.wiremesh.pl