The operator of a coordinate measuring machine must have a solid understanding of the three-dimensional coordinate system and possess relevant experience before operating the equipment. Before starting, it is essential to thoroughly review and follow the safety operation guidelines provided by the manufacturer. These guidelines include important precautions for safe and effective operation. The following points summarize key considerations when using a coordinate measuring machine. Please note that these are general recommendations and should be used in conjunction with the official instructions.
(1) Always ensure you fully understand how to shut down the machine in an emergency before running it. This knowledge can prevent accidents and protect both the equipment and the operator.
(2) The granite surface is the designated measurement area, while the track should never be used as a measurement surface. Avoid scratching or damaging the track, as this can affect the accuracy and longevity of the machine.
(3) Do not use compressed air to clean the machine. Untreated compressed air may introduce dirt into the system, which can damage the air bearings and reduce performance. Instead, use a vacuum cleaner for cleaning.
(4) Keep the workbench and the surface of the workpiece clean to avoid contamination and ensure accurate measurements.
(5) When measuring a workpiece, if the part is centered, move the Z-axis to the top of the workpiece (known as the safety plane), leave some clearance, and then press the emergency stop button on the control panel.
(6) Avoid sudden turns or rapid reversals of the machine. Such actions can cause mechanical stress and potentially damage the equipment.
(7) When manually controlling the machine, use a low speed and maintain a steady pace. Do not engage the joystick until the automatic return has been completed.
(8) Before measuring small holes or slots, confirm that the retraction distance is properly set to prevent collisions and ensure accurate results.
(9) Before running a measurement program, verify that the current coordinate system matches the one required by the program. This ensures consistency and prevents errors in data collection.
By following these guidelines, operators can ensure safe, efficient, and accurate operation of the coordinate measuring machine. Always refer to the manufacturer's manual for detailed instructions and updates. http://news.chinawj.com.cn Submission:
Closed End Blind Rivets,Closed End Pop Rivets,Closed End Aluminum Rivets,Aluminum Closed End Pop Rivets
TIANCHANG FASTENER SYSTEM CO..LTD , https://www.toprivet.com