When it comes to the maintenance of the balcony window, do you first think of cleaning the balcony to keep it clean? If it is, then you are out, and the protection of the balcony window has been quietly popular. Just filming the doors and windows, can not be too casual, if the film is not appropriate, it is likely to be self-defeating.
Before the film is applied, measure the size of the door and window, then take out the special film to check the size and quantity of the film, and cut the film. The balcony must be cleaned, so that the balcony glass is free of dander, dust, and sand. After cleaning the glass, spray water again. The film is divided into two layers, one layer is colorless and transparent, called a protective film, and the other layer is called a film with adhesive color. Before spraying the film, first spray the lubricating liquid to reduce the viscosity of the adhesive layer, then peel off the protective film and apply the film to the position of the film on the glass window. The action is to first cross the cross, then scrape the film from the middle to the sides to fix the film. The bubbles are driven out from both sides, and the force is light, so as to avoid the film being scratched by excessive force. Spray the lubricating liquid on the film, separate the protective film from the film, and move in the same direction as the previous step, vigorously scrape away the water, use a small towel to suck the dried water, and finally trim the corners without scraping, tear off Protective film, film finish. When all windows are filmed, apply a small amount of detergent to remove other residues. Wipe with a dry rag to make the window smooth and bright.
Editor in charge: Shanghai GO Jiaju
G80 Safety Hook,G80 Lifting Hook,G80 Self Lock Hook
Shandong Shenli Rigging Co.,LTD. , https://www.liftinghook.nl