Wallpaper common construction problems
1. It is not right for flowers: when the wallpaper is constructed, the flowers should be misplaced. Check whether the construction method is correct or whether the flowers are not flowered before the construction of the wallpaper, or whether the paper is stretched or the wrong position. Fight on the stage.
2, color difference: wallpaper construction during business trips, should first check whether the wallpaper model and batch number are consistent, then pave the unconstructed wallpaper to see if there is color difference (for flowers, direction), if there is color difference should stop construction, if wallpaper There is a difference in color after construction, which should be the contrast of light or moisture.
3, wallpaper off: wallpaper after the construction fell off, should check whether the wall is treated or whether the glue meets the requirements.
4, wallpaper edge: after the construction of the wallpaper edge, should check whether the brush is uniform and the wall water absorption, appropriate increase the bonding strength of the glue.
5, paper edge dirt: check the wall and construction desktop is too dirty or remove excess glue.
6. The edge is bright: when the edge is under pressure and friction during construction, the friction on the strong paper should be reduced, and the glue on the edge of the wallpaper should be checked for clarity.
7. Shrinkage seam: After the construction of the wallpaper shrinks, cracks should occur. It should be checked whether the construction method is incorrect or the glue bonding strength is poor. The construction of the low-temperature sealing paint will also shrink when it is dry.
8, the wallpaper through the bottom: after the wallpaper construction reveals the background color or shadow, should check whether the color of the wall is consistent or whether the glue is stacked.
9. Bubbles: Check the amount of glue applied or whether the wall has been glued. You can pour the glue into the bubble and stick the wallpaper tightly.
The air, which is drawn in by the motor of a heat gun, is electrically heated. The desired temperature can be set to between 100 to 600 and can be maintained electronically, independent of the required are flow rate. Various possible applications include thawing, drying, tinning, sharping, setting and removal of old coats of paint and staring adhesive processes.
Hot Gun,Electric Hot Air Gun,Hot Air Gun,Hot Air Heat Gun
AWLOP CO.,LTD , http://www.awlop.com